RPB T-Link, Инструкция по эксплуатации

Страница: 27 / 56

27
Remove the side pad from the cover that
is attached with velcro on the side of the
helmet that the Communication is to be
installed. The Communication can be
installed on either side of the helmet.
Attach the side pad back onto the cover
over the Communication. Insert the side pad
back into the helmet.
Place the Communication ear piece into
the attachment clip. Then attach the
Communication Clip into the slots on the
inside of the cover.
INSTALLATION
FIGURE 14.1 FIGURE 14.2
FIGURE 14.3