Royal Alpha 9180sc Скачать руководство пользователя страница 73

Страница: 73 / 80

X/Z MANAGEMENT REPORTS

(Continued)

TO TAKE A (Z or END-OF-DAY) FULL REPORT

"X" or "Z" + [AMT TEND/TOTAL]

Turn the key to the "X" or "Z" position as desired.

2. If an "X" or a PRG/Z Manager Password has been programmed,

ENTER

the

(PASSWORD #)

, then

PRESS

the

[CHECK]

key, or if you did NOT program an "X" or a PRG/Z Manager Password, go to Step

PRESS

the

[AMT TEND/TOTAL]

key.

To issue a duplicate "Z" Report, press the

#/ST/NS

key and the

AMT TEND/TOTAL

key. If other keys are pressed after

the first "Z" Report printing, the duplicate "Z" Report will not print. To disable the duplicate "Z" Report printing feature,
Flag 25 must be changed (see Page 36).

Important:

A Full Reading must be closed out in the "Z" position.

SEE ILLUSTRATION OF A FULL REPORT ON THE NEXT PAGE.

TO TAKE A (WEEKLY or MONTHLY) FULL REPORT

"X" or "Z" + (99) + [AMT TEND/TOTAL]

Turn the key to the "X" or "Z" position as desired.

2. If an "X" or a PRG/Z Manager Password has been programmed,

ENTER

the

(PASSWORD #)

, then

PRESS

the

[CHECK]

key, or if you did NOT program an "X" or a PRG/Z Manager Password, go to Step

PRESS (99)

, then

PRESS

the

[AMT TEND/TOTAL]

key.

SEE ILLUSTRATION OF A (WEEKLY or MONTHLY) FULL REPORT ON THE NEXT PAGE.

Содержание Alpha 9180sc

















































































Результаты поиска

Содержание Alpha 9180sc

Отзывы:

Бренды по названию

Популярные бренды

Royal Alpha 9180sc, Инструкция по эксплуатации

Результаты поиска

Содержание Alpha 9180sc

Отзывы:

Бренды по названию

Популярные бренды