RIM-ED-12S
7
2. Plug the unit into an electrical outlet. Press ON/OFF to turn the unit on.
a) “ ” symbol will stay ON in LCD display window. (“ ” symbol is flashing when it is in stand by mode.)
b) “ ” symbol will flash on. The default setting of the ice cube is set to Large ice cubes
LARGE size symbol and SMALL size symbol .
How to dispense ice
Place a glass or container on the drip tray and press the “ICE” button one time on control panel. The “ ” symbol
will light on the LCD display window. Press the "ICE" button to stop. The “ ” symbol will disappear to indicate the
ice dispensing has stopped.
How to dispense water
Water will dispense for a default time of 10 seconds
Place a glass or cup on the drip dray. Press the "WATER" button. Water will dispense for 10 seconds. To stop
dispensing water within the 10 seconds, press the "WATER" button
Timer Setting
This unit has a delay time setting in the event you would like to program the unit when to start making ice. Delay time
can be set from 30 minutes to 19.5 hours. The default delay time is 1 hour.
When changing/adjusting the delay time, the Letter "H" will be flashing. When the delay time is set, the letter "H" will
remain lit (not flashing) to indicate that the unit programming has been set.
When the unit is ON, press the "TIMER" button continuing to press until the desired setting is reached. Press the
"SELECT" button. The H button will stop flashing. The timer has been set
Canceling Timer Feature
To turn off the timer feature, press the "TIMER" button. The "H" symbol will disappear
CUSTOMIZING THE SETTINGS (ICE-CUBE SIZE / WATER DISPENSING TIME)
If you want larger sized ice cubes bigger than the default large ice cube size, you can increase size by adding time to
each ice-making cycle.
a)Press and hold ON/OFF button for few seconds until the digit “0” appears in the Timer setting of the display.
b) Press “SELECT” button to choose from 0,1, and 2. (When Timer function is active, it will appear as 10, 11, and 12.)
