9
Step 6
-
Identify Parts “6F & 6B” (Right Legs). These
two parts have the “screw in” caster holes at the bottom. Part
“6F” is the leg with the four notches for adjusting the charcoal
pan handle and MUST be positioned at the front. Identify
Parts “5F & 5B” (Left Legs). These are the legs WITHOUT
the “screw in” caster holes.
Step 7
-
Lay the grill body back onto its back surface.
Step 8
-
Attach the legs 5F, 5B, 6F, 6B to the sides of the grill
body using eight Part “A” screws, eight Part “G” washers, &
eight Part “F” nuts. Note: ensure that bolt holes used for
securing side tables are to inside. DO NOT tighten completely.
Install screws from the outside in
(
with the nuts positioned inside
of the grill body
)
.
Step 9
-
Attach Part “9” (Bottom Storage Shelf) to the
bottom of the legs using four Part “A” screws and four Part
“F” nuts. Part “9” (Bottom Storage Shelf) must be positioned
with the “pan” side facing down to prevent it from collecting
water.
See Figure 9.1
Step 10
-
Attach both Part “24” (Side Tables) using
eight Part “B” screws and no nuts.
See figure 9.2
Figure 9.2
Figure 9.1
24
