12
•
•
Step 19
–
Attach all four Part “21” (Butterfly
Dampers) to the back and sides of the grill using
four Part “D” (M5x12) screws and four Part “H”
(M5 Wing Nuts). NOTE: Screws should be
installed from the outside in with the wing nuts
positioned INSIDE the grill body. Hand-tighten.
See Figure 11.1
Step 20
–
Attach Part “17” (Adjustment Handle)
to the handle rod portion of Part “16” (Adjustable
Assembly) that should be protruding from the grill
body. Use Part “I” (Cotter Pin) and Part “J”
(Non-threaded Bolt) to complete the assembly.
NOTE: The handle grip of Part “17” should face to
the right.
See Figure 11.2
Figure 11.2
Step 21
–
Attach Part “20” (Heat Indicator)
using the nuts provided with indicator to Part “4”
(Front Panel)
See Figure 11.3
