13
•
•
•
Step 22
–
Attach Part “4” (Front Panel) to the
grill side panels using six Part “C” screws and six
Part “F” nuts. (NOTE: The side panel flanges go
behind the front panels to make a flush surface.) The
screws should be installed from the outside in (with
the nuts positioned inside the grill body). Tighten
securely. See figure 11.4
Step 23
–
Disassemble the door handle assembly
containing Parts “12, 13, & 14”. Attach Part “12”
(Door Handle w/screw) to Part “4” (Front Panel
w/door) using the attached nut, (G) washer, Part “14”
(Door Handle Support), and Part “13” (Door Latch)
as shown. The latch should be with the face “up”
when installing. Tighten securely.
See figure 12.1
Step 24
–
Attach Part “11” (Ash Pan Handle)
to Part “10” (Slide-Out Ash Pan) using the
attached screws.
See figure 12.2
Figure 11.4
Figure 12.1
