manualshive.com logo in svg

Royal Exclusiv Bubble King Double Cone 130, Руководство по эксплуатации и техническому обслуживанию, Страница: 2 / 14

Поделиться
Скачать
Royal Exclusiv Bubble King Double Cone 130 Скачать руководство пользователя страница 2

For more information, see on the net at 

www.royal-exclusiv.de

. Simply enter the part number or name into  

the search box or email to: 

[email protected]

.

All information without guarantee. We try our best, but printing errors reserved.

R

oyal  

E

xclusiv 

p

umps 

&

 

skimmers

Vorgebirgsstr. 28 // 50389 Wesseling // Germany

Fon +49(0)2236/88055-0 // Fax +49(0)2236/88055-20

[email protected]  //  www.royal-exclusiv.de

Since 1986

Operating and maintenance manual for Bubble King

®

 Double Cone

 

 

For all Bubble King

®

 Double Cone skimmer 130 - 150 - 180 - 200 - 250 - 300

1. Commissioning (putting into operation)     ....................................2

2. Maintenance 

        ....................................4

2.1. Maintenance of the 

Mini Red Dragon - MRD

 - pump   ....................................4

2.2. Deliming and cleaning the impeller of the

 MRD

  

 

....................................5

2.3. Assembly of the rear bearing of the 

MRD

 

   ....................................5

3. Installation of the 

Red Dragon

®

 3 Mini Speedy

 with speed regulation

 

....................................6

3.1. Operation of the 

RD3

 pumps with controller   ....................................6

3.2. Maintenance and cleaning of the 

RD3

 

Mini Speedy

   ....................................6

 

3.3. Decalcification, cleaning and assembly of the 

RD3 Mini Speedy

 ....................................7

3.4. Power outages and emergency power supply     ....................................7

3.5. Meaning of the codes in the display 

    ....................................7

4. Cleaning and assembly of the skimmer 

....................................8

4.1. Assembly        ....................................8

5. Skimmer pot and general information 

     ....................................9

6. Setup instructions, adjustable nozzle (only 

MRD

) 

   ....................................9

7. Cleaning the nozzle and suction pipes  

 

 

 

 

....................................9

8. Cleaning the silencer  

 

      ..................................10

9. Possible sources of error        ..................................11

10. Defects and claims for compensation, disclaimer    

 

 

..................................12

11. Manufacturer’s declaration 

      ..................................13 

11.1. Manufacturer 

       ..................................13

11.2. Informations and support 

     ..................................13

Important Notice

Please read this manual carefully before you install the device. We recommend not to proceed the installation of the 

device until you read the manual. This prevents any questions and problems that might occur in installation process. As 

soon as you power-on the skimmer for the first time, you agree that you read and understood this manual. In doubt or if 

anything is unclear please contact your supplier/vendor or dealer before you start-up the skimmer.

1

Содержание Bubble King Double Cone 130















Отзывы:

Нет отзывов