Roxell Optimax, Инструкция по использованию и сборке

Страница: 61 / 92

ROXELL - 004 - 2414
OPTIMAX - INSTALLATION INSTRUCTIONS
III- 7
Install two feeder pans per tube. Put the tube on the as-
sembled pans, with drop holes point straight down, both
lips INSIDE the pan.
Attention : with Optimax 50.8mm : first insert the in-
sert-half for tube dia. 50.8mm in the top cap insert
for tube dia. 50.8mm.
FIGURE 6.
Tube lips.
Slide the locking insert into the pan.
FIGURE 7. FIGURE 8.
Click the upper cap on the upper part.
MAKE SURE THAT BOTH TEETH ARE CLICKED IN.
You can disassemble as follows :
1. Push on both click teeth of the upper cap.
2. Remove the upper cap.
3. Remove the insert from underneath the hooks.
1
2
1
CLICK
CLICK
FIGURE 9.
FIGURE 10.
Put shut-off-shell underneath the drop hole in the tube.
OPTIONAL : TO INSTALL THE SHUT-OFF-SHELL.