Roxell Optimax, Инструкция по использованию и сборке

Страница: 18 / 92

OPTIMAX - INSTRUCTIONS FOR THE USER
ROXELL - 004 - 0715
I- 10
PROBLEM CAUSE CORRECTIVE ACTION
8.Hopper 1 is empty
while the feed
level in the
second hopper
corresponds with
the position of
the level switch
Birds massively move to one side of
the house, i.e. depending upon the
position of the sun.
A.
The problem occurs sporadically :
You can solve the problem by changing the
round hole in the Flex-Auger tube above
hopper 1 into a rectangular one. Install two
outlet drops above hopper 1 (see fig. 3.) if
necessary, so that more feed drops into
hopper 1. Install the level switch low in hopper
2 (see fig. 2.). Install and adjust drop tubes to
all hoppers high enough.
B.
The problem occurs regularly :
Install a level switch high in each hopper.
Install the level switch low in the last hopper.
Install and adjust the drop tube high, so that
the feed in tube A (over switch level) is carried
to hopper 2.
Drop tube installed and
adjusted high.
Level switch installed
low.
Hopper 1
Hopper 2
FIGURE 1. FIGURE 2.
A
Hopper 2
Case a.
Large feed reserve (A) in
case b.
Hopper 1
FIGURE 3.