29/44
P
Set up the device so that the power plug is freely accessible at all times.
P
Only operate the device with the power cord fully rolled out. Never wind the power
cord around the device. Make sure that the power cord does not come into contact with
hot surfaces. Route the cable so that nobody can trip over it.
2. Preparing the Product for Operation
2.1 Unpacking the scope of supply
Check whether the scope of supply is complete and free of defects immediately after
opening the packaging. Contact the seller immediately if the scope of supply is incomplete
or defective. Do not put the device into operation if it is defective.
2.2 Keeping the original packaging
Keep the original packaging in a safe place over the entire service life of the product.
Use the packaging for storing and transporting the device. Only dispose of the packaging
after the product service life has come to an end. You can find information on the proper
disposal in Chapter 8.
2.3
Setting up the device
The device may only be set up on a secure, horizontal and stable base. Always
ensure the minimum distance to be complied with of 1.5 m to all sides, flammable
objects and other hazard sources.
Before the device can be put into operation, it is necessary to screw together all
individual device parts. You require a Phillips head screwdriver for this.
GB
