Rowi 1 03 03 0352, Оригинальное руководство пользователя

Страница: 28 / 44

28/44
GB
Chapter 5.4 contains corresponding
information on troubleshooting.
2. Service Form
To make the service processing easier,
please carefully fill out the service form
enclosed with the product in block letters
before contacting the
ROWI
Service
Center. This means you have all requisite
information within convenient access.
3. Contact
Write to the
ROWI
Service Center:
service@rowi.de
Most problems can be remedied as part
of the competent, technical advice from
our Service Team. If this is not possible,
the further procedure is outlined here.
4. If an inspection repair by the ROWI
Service Center is necessary, proceed
as follows:
X
Pack appliance
: Pack the appliance in
the original packaging. Make sure that
it is adequately padded and protected
against knocks. Transport damage
is not covered within the scope of
warranty.
X
Include purchase receipt
: Always pro-
vide the receipt as proof of purchase.
The service performance can only be
handled within the framework of the
warranty if the purchase receipt is
provided.
X
Enclose service form
: Enclose the filled
out service form in the transport pack-
aging.
X
Return appliance
: Send the appli-
ance carriage free (up to 30 kg) to the
following address (only after consul-
tation with the ROWI Service Center):
ROWI Schweißgeräte und Elektro-
werkzeuge Vertrieb GmbH
Service Center
Augartenstraße 3
76698 Ubstadt-Weiher
7. Replacement and Spare
Parts
You can order replacement and spare
parts via our website
www.rowi.de
. If
this is not possible or you have questions,
please contact the
ROWI
Service Center.
Please note that some replacement parts
are not available from
ROWI
or cannot
be replaced individually.
8. Disposal
The packaging is made from en-
vironmentally-friendly materials,
which you can dispose of via your
local recycling facility.
Do not dispose of the product as
household waste but instead via
local authority collection points
for materials recycling!
You can
learn about options for the
disposal of end-of-life appliances
from your local or municipal
administration.
20
PAP
Pay attention to the identification
of the packaging materials for
waste separation, these are
marked with abbreviations (a)
and numbers (b) denoting the
following: 1-7: Plastics/ 20-22:
Paper and cardboard/ 80-98:
Composites.
9. Statement of Guarantee
Irrespective of the statutory warranty
claims, the manufacturer shall ensure
a guarantee pursuant to the laws of