Operation
Instruction manual Folding system
Page 70 of 100
5.11.8 Correcting Document Edges (metric)
If the folded document does not meet the desired dimensions, there is
the option to correct the dimensions later using the parameters
„Document front edge“ (cover sheet), “Document rear edge” (base
sheet) and „Transverse folding mode”.
- Fold a sample document.
- Check whether the document edges are perfectly aligned with one
another.
- Measure any deviation.
If the documents have a length of 600 - 700 mm, you have the choice
between two different folding modes.
- „Mode 1“ (standard setting), a full quire is folded and the
remaining part is distributed to two shortened quires. All in all,
three quires result.
- „Mode 2“, a full quire is folded and the remaining part is delivered
unfolded. Two quires result.”
To correct the document edges, connect the PC to the Folding
system with a USB cable.
Screen - Correct document edges menu
3
1
2
3
