Operation
Instruction manual Folding system
Page 37 of 100
5.6
Folding with the Default Folding Program or Custom (Favorites) Program
Inserting the document
Insert the longitudinally folded document
Fully folded document
Select a default or
favorite longitudinal
folding program
(section 3.2, control
panel)
Follow the
information on the
offline table ruler
to correctly place
the document.
Place the
document to be
folded flush
against the left
edge of the ruler,
with the header to
the upper right.
Select the folding program
required for cross folding using
the control panel. If a favorite is
selected, the cross folding
Remove the longitudinally folded
document from the delivery tray
and place it on the folding
machine feeder platform.
Smoothen the longitudinally
folded document with your hand
or with help of a ruler across to
remove air cushion between
individual layers. Then, put the
longitudinally folded document
face down again. Lettering field
forward and push until it gets
captured. The system switches
automatically to cross folding for
document widths less than 240
mm. program is preset.
Fully folded
document
