Rowe Scan 600-20, Руководство по эксплуатации

Страница: 131 / 140

132
Slots and openings at the devices serve ventilation. They shall always be kept
free.
The devices shall be kept dry.
B.3.2 Fuse Protection
The ROWE scanner must be protected by fuses (10 A).
B.3.3 Assembly and Commissioning
The device shall only be connected to a grounded socket with VDE homologation and
located close to the machine. Check in advance whether the mains voltage complies with
the nominal voltage indicated on the type plate. The type plate is located on the left at
the back of the scanner top. Please also consider the following aspects:
If the device is connected to an extension cord / a multiple socket, make sure
that the current draw of the devices connected to the extension cable / multiple
socket does not exceed the cable capacity. Make sure that not more than 10 A
are applied to the wall socket.
The mains plug and the corresponding plug connection shall be easily accessible
without presenting any hazard.
The mains plug connection shall not obstruct access to the machine.
Make sure that no objects are placed onto the power cord. Make sure that nobody
steps onto the cord by mistake.
The components of the devices must not be installed nor removed using force.
B.3.4 Intended Use
Never bypass any mechanical or electric disconnectors.
Do not remove any screwed parts.
It is not allowed to repair the scanner independently. Behind the covers which
can only be removed by means of a tool, there are components which are live or
bear hazards otherwise. Only authorized skilled service staff shall be charged
with maintenance in these areas of the scanner.
The housing is fitted with louvers at the bottom ensuring reliable operation. Do
not cover or close these louvers nor place any objects in front of them. In order to
prevent the above, the product must not be operated on soft furniture such as
beds, carpets, or other soft surfaces. Do not place the product close to or above a
heat source (radiator, etc.). It is allowed to place the product in closed furniture
or rooms only if sufficient ventilation is ensured.
Do not push any objects through the louvers of the scanner. Live components
may be touched, components may be short-circuited, and a fire or an electrical
shock may occur. Prevent liquids from getting onto the scanner.
Prior to any intervention in the electric or mechanical part of the device,
disconnect the power supply.