17
a.
Selects the average XY velocity data to be displayed.
3.
Amp
a.
Selects the average amplitude data to be displayed.
4.
Cor
b.
Selects the average correlation data to be displayed.
5.
Clear
c.
Clears the average data. Allowing restart of the ensemble
averaging at the current ensemble.
Figure 8. Horizontal Profile display page showing the various profile and amplitudes measured by HASCP. .
This data was measured by the HASCP at the lake. The left hand axis is the velocity range (-5 to + 5 m/s) and
the right hand axis represents the RSSI measured by the ADCP from 0 to 100 dB. The numbers on the axis
can be changed by typing into the box.
vi.
Amp (un-coded acoustic transmit-pulse)
1.
0
a.
Unused in this configuration
2.
1
b.
Selects the 1152 kHz two beam Janus amplitude profiles to
be displayed.
3.
2
c.
Selects the single beam 576 kHz amplitude profile to be
displayed.
4.
3
d.
Selects the single beam 2304 kHz amplitude profile to be
displayed.
5.
4
e.
Selects the single stage beam 1152 kHz amplitude profile to
be displayed.
Содержание HASCP
