Rowe HASCP, Руководство по эксплуатации

Страница: 13 / 79

13
1. The desired ensemble interval. If the ping timing exceed the Ensemble
interval the ensemble timing will slip.
iii. Latitude (deg)
1. Deployment location
iv. Longitude (deg)
1. Deployment Location
v. Right Bank
1. Sets Right Bank Deployment location
vi. Left Bank
1. Sets Left Bank Deployment location
vii. Height above Bottom (m)
1. Physical location of HASCP above the bottom during deployment
2. Required for waves calculations
viii. Water Depth (m)
1. Physical location of HASCP during deployment
2. Useful for speed of sound calculation if pressure sensor and/or surface
detection not available.
ix. Water Temperature (C)
1. Used when built in temperature sensor is not available.
x. Water Speed of Sound (m/s)
2. Used for speed of sound when no sensors are available to calculate or
measure the speed of sound. Sometimes used when the end user wants to
scale the Doppler and range data themselves.
Figure 6. Firmware tab showing the firmware version, source level in dB for different power level, and the
receive sensitivity of the HASCP. Bm0 and Bm2 are beam 0 and beam 2 (1200 kHz), Bm1 is beam 1 (600
kHz), Bm3 is beam 3 (2400 kHz) and Bm4 is beam 4 (1200 kHz).