Rowe HASCP, Руководство по эксплуатации

Страница: 14 / 79

14
3.5 Deployment Data and Power Options
i. Auto Start on Power Up
1. Start Pinging and outputting/recording data when power is applied to the
HASCP .
ii. Internal Data recording
1. Turn on/off internal data recording to the SD card.
iii. External Data Logger
1. Enable the output trigger line to maintain a high level during serial data
output. This is useful when the RTI data logger needs to be power
cycled.
iv. RS485 Serial Data Output
1. Enable HASCP data output on the RS485 data lines.
v. RS232 Serial Data Output
1. Enable HASCP data output on the RS232 data line.
Figure 7. Deploy Page summary showing an example setup
3.6 Instrument Measurement Settings
i. Volume
1. Velocity and Amplitude
a. Begin (m)
i. Selects the first sample location for the volume.
b. End (m)
i. Selects the last sample location for the volume.