Rover DEFENDER 300Tdi, Руководство по ремонту

Страница: 111 / 450

FUEL SYSTEM
11 REPAIR
HEATER PLUGS
Service repair no - 19.60.31
Remove
1. Disconnect battery.
No.1 heater plug - air conditioning models:
2. Release drive belt from compressor pulley. See
AIR CONDITIONING, Repair, Compressor
drive belt
3. Remove 4 bolts securing compressor to front
cover, move compressor aside.
No.3 heater plug:
4. Remove retaining bolt and withdraw breather
valve from rocker cover. Remove and discard ’O’
ring.
All heater plugs:
5. Remove terminal nut and disconnect wire from
heater plug terminal.
6. Unscrew heater plug.
Refit
7. Clean heater plug and seating.
8. Coat threads of heater plug with suitable
anti-seize compound operational to a
temperature of 1000
°
C.
9. Fit heater plug, tighten to 23 Nm (17 lbf/ft).
10. Connect wire to heater plug terminal and secure
with nut.
NOTE: Feed wire must be connected to
No. 4 heater plug terminal.
No. 3 heater plug:
11. Lubricate new ’O’ ring with engine oil and fit to
breather valve.
12. Fit valve to rocker cover, tighten to bolt to 15 Nm
(11 lbf/ft).
No. 1 heater plug - air conditioning models
13. Position compressor to front cover, fit bolts and
tighten to 25 Nm (18 lbf/ft).
14. Fit drive belt to compressor pulley and adjust
tension. See AIR CONDITIONING, Repair,
Compressor drive belt
All models:
15. Reconnect battery.