Rover 200 coupe, Руководство пользователя

Страница: 36 / 71

Lights & Indicators
1. Side, Tail and Panel Lights USING YOUR LIGHTS
Rotate switch to Position 1. When the ignition
is switched on, the dim-dip headlights also Dim-dip Headlights
illuminate. Dim-dip headlights illuminate automatically when
sidelights and ignition are switched on. They are
2. Headlights brighter than normal sidelights, but of insufficient
Rotate switch to Position 2. intensity to meet the requirements of UK legislation
governing the use of headlights when driving in
3. Headlight Flasher darkness or in seriously reduced visibility. In poor
Flick lever briefly towards the steering wheel lighting conditions, full headlights (position 2)
and release. must always be used.
4. Headlight Main and Dipped Beams Lights On Warning Buzzer
Pull lever fully towards the steering wheel to If any exterior lights are left on when the ignition is
change headlight beams (the blue warning light switched off, a warning buzzer will sound as soon
glows whenever the headlights are on main as the driver's door is opened. The buzzer will
beam). Cease as soon as the lights are switched off or
when the driver's door is closed.
5. Directions Indicators
Move the lever down to operate left-hand Headlights on Main Beam
indicators, and up to operate right-hand Take care not to dazzle other road users. Never use
indicators. headlights on main beam in the face of on-coming
Hold lever half-way up or down against spring traffic or when closely following another vehicle.
pressure to indicate a lane change.