Heating & Ventilation
USING YOUR HEATER
Fresh air enters the heater through the air intake
grille in front of the windscreen. This must always
be kept clear of obstructions, including snow and
ice. Stale air is automatically drawn out through
vents in each side of the luggage compartment.
The following examples show three basic heating
and ventilation settings. Further adjustment of the
air distribution, temperature and blower controls
aill result in a wider range of options, enabling you
to always obtain the best use from the heater unit.
Remember; with the blower switched off, the
Volume of air entering the car is dependent on
Driving speed alone, and that full heating is not
Available until the engine has reached its normal
Operating temperature.
NOTE
: Foot well ducts beneath the front seats
provide heating for rear passengers. Do not
obstruct them by placing luggage under the seats.
Heating
Set the controls as shown, but with the
blower at the slowest speed (position 1)
until the temperature gauge shows that the
engine is warming up. Keep the centre face
level vents closed.
Ventilation
Set the controls as shown. Open the centre
Face level vents, and adjust the side face
Level vents to deliver fan assisted air. Adjust
The blower speed as required.
Demist or Defrost Windscreen
Set the controls as shown to obtain
maximum heated air flow from windscreen
and side window vents.
Содержание 200 coupe
Страница 1: ...Edited by Vilislav Pankov 2010...
