7
No Diving or Jumping.
Observe all Safety Rules.
4-7
B. Fill your Pool with Water
1. Finish filling the pool
a. Turn off the vacuum and carefully remove it from the pool.
b. Fill the pool with water to 2” (5cm) below the lowest opening.
Make sure you remove any creases from the liner in the bot-
tom of the pool before the water level gets too high.
c. While the pool is filling, remove the nails that were holding
the bottom rails in place.
d. Your pool is now installed. You must now install the filter and
pump, the skimmer and water return inlet.Please follow the
installation instructions that come with these products.
Caution:
Before making any
openings in the
liner, fill the pool
with 60cm (24”) of
water to stretch the
liner fully. When filling
your pool, begin with
a garden hose until
there is about 30cm
(12”) of water in the
pool. This will allow
the liner to stretch
gradually. You can
then use a heavier
flow to finish filling
it up.
Important:
Make sure that your pool is round, do not assume that by filling up the pool that this will help
the pool to place itself into a perfect round circle. Ensure that it is round before filling up the
pool with water.
IMPORTANT SAFETY INFORMATION:
Please refer to the safety page at the beginning of this instruction manual. You must follow the
rules and information regarding placement of safety stickers on your pool.
Содержание AMBASSADOR
