Rotrex C15-16, Техническое руководство

Страница: 16 / 42

Technical Handbook
Rev. 1.6
WWW.ROTREX.COM
Page 15 of 41
Designing and handling interfaces
4.3 Brackets
Section 6.4 of this document provides the critical dimensions needed for the construction
of the main bracket. Following these specifications is important to ensuring adequate
fixation of the supercharger and pulley/belt at running conditions. In addition, the
following guidelines are also important:

Choose geometry and material that ensures optimum alignment, stability, and
durability

Include a minimum of 3 strong fixing points to help prevent excessive vibration and
bending during operation. Remember to avoid materials that will corrode when
mounted onto aluminium

Consider possible manufacturing tolerances on engine anchoring points and avoid
rough cast surfaces since this can result in considerable belt misalignments that
can cause belt slippage, noise and even failure

Include surface treatments to prevent corrosion and improve looks. Remember
that some surface treatments build a considerable layer on top of the material, and
this should be accounted for to remain inside the specified dimensional tolerance
range