background image

1.9  Target groups’ obligation to give instructions

INFO

Each target group must fulfil their obligation to give instructions
in full.

Unless specified otherwise in the text below, documents and
information can be passed on as a printed document, on a data
storage device or via the Internet.

Responsibility of hardware dealers

Hardware dealers must pass the following documents on to the door
manufacturer:

Catalogue

Installation, maintenance and operation instructions

Responsibility of the door manufacturer

The door manufacturer must pass the following document on to building
element dealers or the builder, even if a subcontractor (installation company)
is involved:

Installation, maintenance and operation instructions

They must ensure that the end users are provided with the documents and
information intended for them in printed format.

Responsibility of building element dealers / the installation company

Building element dealers must pass the following document on to the
builder, even if a subcontractor (installation company) is involved:

Maintenance and operation instructions

Responsibility of the builder

The builder must hand over the following document to the end user:

Maintenance and operation instructions

1.10  Copyright protection

The contents of this document are copyright-protected. This content can be
used when working with the hardware. Any other use is not permitted
without written permission of the manufacturer.

1.11  Limitation of liability

All information and instructions contained in this document have been
compiled in consideration of the applicable standards and regulations, the
latest developments in technology and many years of knowledge and
experience.

The hardware manufacturer assumes no liability for damage caused by:

Failure to comply with this document and all product-specific documents
and other applicable directives (see the chapters entitled “Security” and
“Stipulated use”).

Improper use / misuse (see the chapters entitled “Security” and “Stipu-
lated use”).

General information

Target groups’ obligation to give instructions

12 · 

05 / 2020

 · 

IMO_438_EN_v3

Roto Safe E Eneo C | CC | CF

Subject to change.

Содержание Safe E Eneo C




































































































Отзывы: