Subject to change.
Roto E-Tec Drive | Control Unit IMO_440_EN_v1
May 2019
9
General information
Limitation of liability
All information and instructions contained in this document have been
compiled in consideration of the applicable standards and regulations,
the latest developments in technology and many years of knowledge and
experience.
The hardware manufacturer assumes no liability for damage caused by:
Failure to comply with this document and all product-specific documents
and other applicable directives (refer to the chapters “Security” and
“Stipulated use”).
Non-stipulated use / misuse (refer to the chapters “Security” and “Stipu-
lated use”).
Insufficient invitation to tender, non-compliance with installation specifi-
cations and non-compliance with the application diagrams or application
ranges.
Increased contamination.
Claims made by third parties against the hardware manufacturer on ac-
count of damage resulting from misuse or failure to comply with the obliga-
tion to give instructions on the part of hardware dealers, the window / bal-
cony door manufacturer, the constructor of the power-operated window,
the planning engineer, building element dealers or the builder are passed
on accordingly.
The obligations agreed in the delivery contract, the general terms and con-
ditions, the hardware manufacturer’s terms and conditions of delivery and
the legal provisions applicable when the contract was concluded shall apply.
The warranty only covers original Roto components.
We reserve the right to make technical changes as part of improvement to
performance characteristics and further development.
