14
May 2019
IMO_440_EN_v1
Roto E-Tec Drive | Control Unit
Subject to change.
Installation
Installing the driver
Installing the driver
Install the necessary driver before installing the software.
You can find this at
https://ftt.roto-frank.com/en/products/product-view/detail/roto-e-tec-drive/
Save the file in a directory of your choice. Unzip the file and install the
driver.
1. Double-click on the driver file to start installing the driver.
2. Confirm any security warnings that appear by clicking on
“Ausführen”
[Run]
.
3. Confirm
extraction
of the driver.
4. Accept the license agreement and confirm the following steps of driver
installation by clicking on
“Weiter” [Next]
.
Once you have successfully installed the driver, install the software and
connect the Control Unit to your PC.
