Subject to change.
Roto E-Tec Drive | Control Unit IMO_440_EN_v1
May 2019
13
Information on the product
Functional principle and operation
Functional principle
The Control Unit is usually operated with the software provided using
a connected PC. You are, however, also able to test the functions of a
Roto E-Tec Drive using the push-buttons on the Control Unit:
Manual operation
1. Connect the E-Tec Drive to the Control Unit using the RJ45 cable
provided.
2. Connect the power supply unit to the Control Unit and power supply
socket.
3. Follow the instructions on the rear of the Control Unit to perform a
function test.
To be able to use all of the Control Unit functions in full, install the software
supplied on a PC or laptop and control the Roto E-Tec Drive using the com-
puter connected by the USB cable.
Also use the USB connection with the computer to change the drive set-
tings and run software updates.
System requirements
The PC that is to be operated using the Control Unit must meet the follow-
ing system requirements:
Windows operating systems in one of the following versions
Windows 7 or more recent (SP1)
Windows 10
Rights
To install the driver and software, you must be logged into the PC with
administrator rights. Contact your system administrator if necessary.
