Roto-Mix 425 Скачать руководство пользователя страница 32

Страница: 32 / 92

SCALE MOUNTING (TRUCK MOUNT
ONLY)

The primary scale indicator is mounted to the right

hand side of the driver seat on an adjustable pedestal.

The pedestal is custom fit to the truck and is bolted to

the floor of the cab and supported with braces to avoid

vibration. The pedestal can be adjusted as shown in

Figure 16 to provide easy viewing and access from the

drivers seat.

Auxiliary indicator mounts are also supplied on the

right and left hand side of the mixer to provide for

mounting of an optional Remote Indicator on either or

both sides of the mixer. These mounts allow the indi-

cator to be rotated for easy viewing.

The Truck mixer is initially provided with mounting

brackets matching the scale indicator purchased. If in

the future a different scale indicator is purchased, new

mounting brackets will be needed.

CLEARANCE LIGHTS (TRUCK MOUNT
ONLY)

Rear mixer mounted clearance lights and bunk spot

lights are optional equipment on truck mounted mixers.

The rear clearance light and rear bunk light are

mounted to a full width light bar which mounts to the

mixer using existing Tuff Glide Extension mounting

holes. The front bunk light mounted above the con-

veyer area and the front clearance lights mounted on

the front corners of the mixer are attached using sup-

plied brackets and the existing Tuff Glide Extension

mounting holes. All wiring runs through supplied con-

duits running along the top left edge of the mixer and

down along the back edge of the mixer to the truck

frame.

The front and rear clearance lights are wired directly

into the truck light wiring and are turned on and off with

the truck's lights. The bunk lights are wired to the

switch box supplied with the mixer and are turned on

and off using the switch marked "Lights".

Page 32

FIGURE 16. SCALE INDICATOR

AROUND ADJUSTING

BOLT

IN/OUT

ADJUSTING BOLT

UP/DOWN

ADJUSTING

BOLT

Содержание 425





























































































Результаты поиска

Содержание 425

Отзывы:

Похожие инструкции для 425

Бренды по названию

Популярные бренды

Roto-Mix 425, Руководство оператора

Результаты поиска

Содержание 425

Отзывы:

Похожие инструкции для 425

Бренды по названию

Популярные бренды