Roto-Mix 425 Скачать руководство пользователя страница 3

Страница: 3 / 92

Page 3

MODEL 425/500/575 TMR RUFFAGE MASTER™

INSPECT THE FOLLOWING AND SERVICE AS REQUIRED

Check all structural welds for appearance.

Check rear drive enclosure for proper sprocket

alignment and correct chain tension.

Check rear doors for proper latch tension and fit,

correct any leaks.

Check conveyor chain for proper tension and

proper clearance. See Adjustment Section.

Check clearance between moving parts.

Check scale mounts for alignment and pins for

looseness.

Check inside of mixing chamber for trash, auger

clearance and check augers for correct installa-

tion.

Check external paint for appearance.

Check all bolted connections for tightness.

Check wheel lug bolts and torque to 85 ft.-lbs.

Maintain tire pressure at 55-60 psi.

Check rear drive bearings for alignment, tightness

of locking collars and proper placement of bearing

stops.

Check rear drive enclosure for alignment and

proper chain tensions.

Check oil level of rear drive enclosure.

Check main drive shaft for proper installation and

clearance.

Check hoses for correct clearance and fittings for

leaks.

Check U-joint for timing and installation.

Check frame/box mounting points for proper

installation.

Check auger bearings for correct installation and

grease bearings.

Check for trash or foreign articles in discharge

conveyor.

RUN MIXER AND CHECK THE FOLLOWING:

Check for vibration or runout of drive lines.

Check for free operation of discharge conveyor.

Check augers for straightness.

Check mixer, observing all safety decals and safety shields are in

place and secured, including top guards on stationary units.

Check for chain vibration in rear drive.

Check chute and door actuation.

Operator has been instructed in operation, maintenance and

safety precautions.

ALWAYS DISCONNECT AND LOCKOUT ELECTRICAL POWER (STATIONARY MODELS) OR DISENGAGE

PTO AND REMOVE KEYS FROM TRACTOR (TRAILER MODELS) BEFORE CLEANING, ADJUSTING, LUBRI-

CATING OR SERVICING THIS MACHINE.

Содержание 425





























































































Результаты поиска

Содержание 425

Отзывы:

Похожие инструкции для 425

Бренды по названию

Популярные бренды

Roto-Mix 425, Руководство оператора

Результаты поиска

Содержание 425

Отзывы:

Похожие инструкции для 425

Бренды по названию

Популярные бренды