16
ENGLISH
9.8
Changing the saw band
Wear working gloves.
Switch off the machine, turn the main switch.
Remove wheel covers and saw band covers.
Release roller lock by star handle
(6)
.
Relieve saw band by turning the star handle anti-clockwise, pull out of the saw band detours
and take off.
Insert new saw band; teeth must point to the rear and in cutting direction.
Introduce saw band into saw band deflection, and apply tension by turning the star handle
right.
Check proper fit of the saw band by turning the wheels by hand in cutting direction.
Re-attach wheel covers and saw band covers.
When rotating new saw bands apart, there is a risk that they might jump open
and cause injuries, particularly to the face!
10. Switching
off
For short interruption of work switch off the machine by main switch.
For longer interruption of work ( e.g. over night, weekend or in holiday ) turn off main switch
and close.
11. Care and maintenance
Daily
Clean saw band wheels, saw band deflection, and the environment of the saw band of splinters
and dust. Clean wiper brusk.
weekly
Thoroughly clean saw, lubricate guides. Control the safety parts of the saw.
yearly
Check the saw band guiding system and check all the electric parts.
Statutory safety checks carried out
12. Troubleshooting
Trouble
possible cause
can be done by user
Motor doesn’t run
Plug not inserted
yes
Cable failure
no
Motor
overload
switch
failure
no
Saw band jump out
wheels polluted
yes
Saw ban tension isn’t correct
yes
band
redirection
polluted
yes
wheel
adjustment
isn’t
correct
yes
13. Disposal
The regulations for normal recycling of waste and/or removal are to be adhered. Pay attention to
environmentally friendly disposal of fuels, lubricants, and auxiliary materials.
