Roth CM Manifold Скачать руководство пользователя страница 4

Страница: 4 / 10

Roth CM Manifold System
Installation Instructions

Roth Industries, Inc. 315-755-1011 e-mail - [email protected] www.roth-america.com

Assembly

Manifold trunk segments

1. Manifold trunk segments have a male and female threaded end. They are connected by

turning clockwise until they hit the end stop. Segments will automatically line up.

2. The male end includes an o-ring. Be sure the o-ring is seated properly.

End cap

1. End caps are connected by turning clockwise until they hit the end stop.

Tee segment

1. Tee segment has a male threaded end. They are connected to the manifold trunk segment by

turning clockwise until they hit the end stop.

2. Tee segment has four connection points on top, bottom, and two sides. Each connection has

a plug which can be removed with a large slotted screwdriver.

Ball Valve

1. Ball valve is threaded into the brass union nut on the tee segment.
2. Position the handle of the ball valve to desired angle and tighten union nut.

3. The connection is a metal flat seal. Make sure both flat surfaces are free of debris.

Fill/drain valve

1. Remove plug in bottom connection on tee.

2. Thread fill drain valve into tee until snug.

3. Position valve tee to desired location and tighten union ring on valve until hand tight.

Temperature gauge

1. Insert temperature gauge into a connection point on the tee. Do not remove plug.

Pressure gauge

1. Remove any plug on tee.
2. Thread pressure gauge into connection point.

Содержание CM Manifold











Результаты поиска

Содержание CM Manifold

Отзывы:

Бренды по названию

Популярные бренды

Roth CM Manifold, Руководство по установке

Результаты поиска

Содержание CM Manifold

Отзывы:

Бренды по названию

Популярные бренды