Rotenso M35X, Руководство пользователя

Страница: 123 / 148

87
User manual
Room air conditioner - MIRAI X
EN
PART 5. REMOTE CONTROL SUPPORT
• Press the SET button to enter the function setting, then press SET button or TEMP or TEMP button
to select the desired function. The selected symbol will flash on the display area, press the OK button to
confirm.
• To cancel the selected function, just perform the same procedures as above.
• Press the SET button to scroll through operation functions as follows:
Wind flow follow people* ( )
Breeze Away* ( ) Active Clean/Self clean ( )
Fresh ( ) Sleep ( ) Follow Me ( ) AP mode ( ) Wind flow follow people* ( )
Breeze Away* ( ) ...
Note
[*]: Model dependent
Wind flow follow people ( ) (some units):
Under Intelligent eye mode, with the built-in infrared sensor, the unit can detect the people’s activities in the
room. The wind can follow people.
Breeze Away ( ) (some units):
This feature avoids direct air flow blowing on the body and makes you feel indulging in silky coolness.
Note:
This feature is available under cool, Fan and Dry mode only.
Active clean function ( ) (some units)
The Active Clean Technology washes away dust, mold, and grease that may cause odors when it adheres
to the heat exchanger by automatically freezing and then rapidly thawing the frost. When this function
is turned on, the indoor unit display window appears “CL”, after 20 to 45 minutes, the unit will turn off
automatically and cancel CLEAN function.
FRESH function ( ) (some units) :
When the FRESH function is initiated, the Ionizer/Plasma Dust Collector(depending on models) is energized
and will help to remove pollen and impurities from the air.
Sleep function ( ):
The SLEEP function is used to decrease energy use while you sleep (and don t need the same temperature
settings to stay comfortable). This function can only be activated via remote control.
For the detail, see “sleep operation” in user manual.
NOTE:
The SLEEP function is not available in FAN or DRY mode.
Follow me function ( ):
The FOLLOW ME function enables the remote control to measure the temperature at its current location and
send this signal to the air conditioner every 3 minutes interval. When using AUTO, COOL or HEAT modes,
measuring ambient temperature from the remote control(instead of from the indoor unit itself) will enable
the air conditioner to optimize the temperature around you and ensure maximum comfort.
NOTE:
Press and hold Turbo button for seven seconds to start/stop memory feature of Follow Me function.
• If the memory feature is activated “ON” displays for 3 seconds on the screen.
• If the memory feature is stopped “OFF” displays for 3 seconds on the screen.
• While the memory feature is activated, press the ON/OFF button, shift the mode or power failure will not
cancel the Follow me function.