62
63
5.6 Changing the filter
The effectiveness of the filter will be exhausted after drawing approx. 50 litres of water.
«Filter replace» appears on the display.
☛
You can still draw coffee, hot water and steam. We would recommend that you
should always replace the filter immediately, however.
Please note
: If your use of water is lower, the filter must be replaced after two months
at the latest. No message appears in the display. You can set the replacement date
using the special rotary indicator on the top of the filter.
Turn the Control button (2) to the symbol in the Main menu:
Settings
• Press the Control button to confirm.
• Turn the Control button to «Filter» and press it to confirm.
• «Filter inserted? Yes» appears in the display. Press the Control button to confirm.
• Turn the Control button to «Filter change».
• Press the Control button to confirm. «Replace filter» appears in the display.
• Empty the water tank (14).
• You can remove the old filter from the tank and carefully screw in the new one with
the help of the mounting tool.
• Fill the tank with fresh water and put it back into the coffee machine.
• Place a sufficiently large receptacle under the outlet (5) and press the Control button.
The system will now be rinsed and the display shows «Rinsing filter».
• The appliance rinses itself, and is now ready for operation again.
5.7 General cleaning
☛
Never immerse the appliance in water.
☛
Do not use any scouring cleaners for the cleaning.
• Use a soft, damp cloth to clean the inside and outside of the case.
• Empty the drip tray (6b) and the grounds holder (6c), at the latest when this is indi-
cated in the display. Use soapy water for cleaning from time to time.
☛
When cleaning the drip tray (6b), always ensure that the two contacts (6d) at
the back of the tray are always clean.
• The water tank should be rinsed daily and be refilled with fresh, cool water.
☛
Dried milk residues are difficult to remove. You should therefore clean the
frother, the hose and the outlet (spout) regularly (see Chapters 5.1 – 5.3).
Note
: The frother must be completely dismantled from time to time, and all its indi-
vidual components should be rinsed under clear water:
• Remove the lower cover plate at the outlet (5) (Fig. C).
• Pull out the frother downwards (Fig. D) and dismantle it into its individual compo-
nents. (Fig. E).
5.5 Descaling the system
If the appliance needs to be descaled, the «Please descale» message will appear on
the display.
☛
You can continue to brew coffee or draw hot water and steam. We would,
however, recommend that you run the descaling program as soon as possible.
☛
The program can also be carried out without the message appearing.
Please note
: – The filter must always be removed from the water tank before starting
the program.
– Please comply exactly with the sequence described here during the process!
– You may not interrupt the descaling program!
– Never use vinegar or liquids based on vinegar to descale your coffee
machine; only use «Calc Clean» or a similar product.
Turn the Control button (2) to the symbol in the Main menu:
Care
• Press the Control button to confirm.
• Turn the Control button to «Descaling the system» and press it to confirm.
• The display shows: «Empty trays».
• Empty the drip tray (6b) and put it back into the appliance. The display shows:
«Remove tank».
• Remove the water tank (14).
• Remove the filter and fill water and the corresponding amount of descaling liquid into
the tank, but ONLY up to the 0.5 litre mark (follow the manufacturer’s instructions).
• Connect the hose to the outlet and to the drip plate (Fig. B).
• The display shows: «Start descaling».
TIP
: Place a sufficiently large receptacle (approx. 0.5 l) under the coffee outlet (5).
• Press the Control button (2).
• The appliance starts the descaling process. The display shows «System decalcifies».
• The descaling runs automatically and lasts approx. 20 minutes. The descaling solu-
tion will flow through the system at intervals.
• Wait until the display shows «Empty trays».
• Empty the drip tray (6b) and put it back into the appliance.
• The display shows «Fill up water».
• Remove the water tank (14) and rinse it out well with clear water.
• Now replace the filter in the appliance (if you were using one before).
• Fill the water tank with fresh water and put it back in the appliance.
• Connect the hose to the outlet and to the drip plate (Fig. B).
• The Display shows: «Start rinsing».
• Press the Control button (2) to confirm. The display shows: «Rinsing».
• The rinsing cycle runs automatically and takes approx. two minutes.
• Wait until the display shows «Empty trays».
• Empty the drip tray (6b) and put it back into the appliance.
• The appliance is now ready for operation again.
14_0731_ROT_U2785Ch_BA_Universa_Inhalt.indd 62-63
14_0731_ROT_U2785Ch_BA_Universa_Inhalt.indd 62-63
22.05.14 15:31
22.05.14 15:31
