16
S14 Integrated Network Streamer
Specifications
Maximum Power Output
Maximum Power Output
150 watts/ch, 4 ohms
Continuous Power Output
Continuous Power Output
80 watts/ch, 8 ohms
Total Harmonic Distortion
Total Harmonic Distortion
< 0.04%
Intermodulation Distortion
Intermodulation Distortion
(60 Hz : 7k Hz, 4:1)
< 0.03%
Frequency Response
Frequency Response
Line Level Inputs
10 Hz - 100k Hz, ± 0.5 dB
Damping Factor
Damping Factor
(20 Hz – 20k Hz, 8 ohms)
400
Input Sensitivity / Impedance
Input Sensitivity / Impedance
Line Level Inputs
200 mV / 47k Ohms
Input Overload
Input Overload
Line Level Inputs
4.5 V
Tone Controls – Bass / Treble
Tone Controls – Bass / Treble
±10 dB at 100Hz / 10k Hz
Signal to Noise Ratio
Signal to Noise Ratio
(A weighting)
Line Level Inputs
100 dB
Digital Section
Digital Section
Frequency Response
Frequency Response
10Hz - 90k Hz (± 2dB, MAX)
Signal to Noise Ratio
Signal to Noise Ratio
(A weighting)
98 dB
Input Sensitivity / Impedance
Input Sensitivity / Impedance
- 20 dBFS / 75 ohms
Digital Inputs
Digital Inputs
SPDIF LPCM
(up to 192k Hz/24 bit)
PC-USB
PC-USB
USB Audio Class 2.0
(up to 384k Hz/24 bit)*
*Driver installation required
Support
MQA and MQA Studio
(up to 384k Hz/24 bit)
General
General
Power Requirements
Power Requirements
USA
120V, 60 Hz
EC
230V, 50 Hz
Standby Power Consumption
Standby Power Consumption
Normal
< 0.5 watts
Power Consumption
Power Consumption
280 watts
BTU
BTU
(4 ohms, 1/8th power)
733 BTU/h
Dimensions
Dimensions
(W, H, D)
430 x 93 x 345 mm
17” x 3
5
/
8
” x 13
1
/
2
”
Panel Height
Panel Height
80 mm / 3
1
/
8
”.
Weight
Weight
(net)
9.15 kg, 20.17 lbs.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co., Ltd.
Tokyo, Japan.
“Made for iPod,” and “Made for iPhone,” means that an electronic accessory
has been designed to connect specifically to iPod or iPhone, respectively, and
has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory
with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
Use of the Works with Apple badge means that an accessory has been
designed to work specifically with the technology identified in the badge and
has been certified by the developer to meet Apple performance standards.
To control this AirPlay 2–enabled speaker, iOS 11.4 or later is required.
Apple, AirPlay, Apple TV, Apple Watch, iPad, iPad Air, iPad Pro, iPhone,
and Lightning are trademarks of Apple Inc., registered in the U.S. and
other countries.
‘MQA’ or ‘MQA
Studio
’ indicates that the product is decoding and playing
an MQA stream or file, and denotes provenance to ensure that the sound is
identical to that of the source material. ‘MQA
Studio
’ indicates it is playing
an MQA Studio file, which has either been approved in the studio by the
artist/producer or has been verified by the copyright owner.
‘OFS’ confirms that the product is receiving an MQA stream or file. This
delivers the final unfold of the MQA file and displays the original sample rate.
