D
Pg. 12/14
Tightening your Pro Edge Tower Bimini Canvas
It is normal that your bimini canvas will stretch over time and use. Your Pro Edge
Tower Bimini has been designed to allow you to tighten your canvas as needed.
There are 2 ways you can tighten your bimini canvas. You can use method 1,
method 2 or a combination of both.
Canvas Tightening method 1
Your bimini clips are mounted
to plates that are sewn to
your bimini canvas. These
plates have 5 sets of holes
designed to allow you to
move your bimini clip position
to achieve a tighter canvas.
Plate sewn to the canvas
Your clips are
factory installed
in the middle
position
With a Phillips screwdriver, remove
the 2 bolts that secure each bimini
clip to the canvas. Slide each bimini
clip over the new hole set that you
would like to install them in.
It is recommended that the clips
only be moved 1 hole position at a
time.
Once the clip is lined up over the
desired holes, re-secure the clips to
the canvas using a Phillips
screwdriver and the 2 bolts.
Do not overtighten these
bolts
***Clips are attached to the bimini Canvas. Bimini
Canvas is not illustrated for image clarity***
