Black
C
Remove the #6 tapping screw, washer and safety
lanyard from the speaker. Set these aside for later.
6.5x5.25” Classic Vamp Spin Speaker Installation Instr
u
ctions
www.roswellmarine.com
4
x8
Connect the included wiring harness to the wiring on your
tower/boat.
1)
Use wire strippers to expose 1/4” of wire on all wires.
2)
Connect the tower wires to the speaker wiring harness.
3)
Heat shrink the connectors.
4)
Carefully push the wires back into the tubing.
Carefully cut the first piece of shrink wrap with a utility
knife to expose all of the wires and remove the plug.
Be very cautious not to cut through the wire’s
insulation.
shrink wrap
For non-wired towers: Go to step D
For Pre-wired Roswell towers: Remove the plugs to
access the wires. Carefully pull the wires out of the
tower.
x2
Illustrated assembly on Roswell Aviator Tower
A
B
E
Speaker Harness
Connectors
Tower Wires
Deutsch Connector
D
Determine your mounting location on your tower
and note the tubing size for that location. Roughly
check to estimate speaker clearance in this location.
S
Speaker -
12V +
12V -
White / Black
Light Blue
White
