Rostra 250-8052, Руководство по установке

Страница: 6 / 12

PAGE 6
FIGURE 3
2. USE AN ALCOHOL PAD TO CLEAN THE DASH AREA AND BASE OF PEDESTAL
SELECTED FOR INSTALLATION. (IN THE EVENT THE DASH HAS BEEN WIPED
WITH A SILICON PRODUCT AN ACTIVATOR MAY BE REQUIRED TO REMOVE THE
EFFECTS OF THE SILICON MATERIAL.)
3. ONCE THE BASE HAS BEEN CLEANED
AND DRIED, REMOVE ADHESIVE COVER
FROM ONE SIDE OF MONITOR BASE
ADHESIVE MOUNTING FOAM AND APPLY
IT TO THE MONITOR BASE. WARNING:
THE FOAM ADHESIVE IS A ONE TIME
STICK PRODUCT. IF YOU PLACE
IMPROPERLY YOU WILL HAVE TO
REPLACE THE FOAM AND THERE IS ONLY
ONE STRIP WITH THE KIT. WITH THE
FOAM ADHESIVE STRIP AND THE DASH
CLEANED AND DRIED, REMOVE THE
ADHESIVE COVER FROM THE MONITOR
BASE. PLACE THE MONITOR IN POSITION
AND PRESS FIRMLY IN PLACE FOR 20-30
SECONDS TO ENSURE SOLID ADHESION.
(FIGURE 3)