Rostra 250-8052, Руководство по установке

Страница: 5 / 12

PAGE 5
INSTALLATION
STEP 2A: STEM MOUNTED MONITOR
STEP 2B: STAND MOUNTED MONITOR
FIGURE 1
1. BEGIN MONITOR INSTALLATION BY
FORMING MONITOR BASE TABS TO
FIT THE CONTOUR OF THE DASH
WHERE MONITOR IS TO BE PLACED.
BY FAILING TO PROPERLY FORM THE
BASE TABS, THE BASE WILL NOT
ADHERE SECURELY TO THE DASH
ONCE DRY FITMENT TO THE DASH IS
COMPLETE ATTACH THE MONITOR
TO THE BASE TO VERIFY
PLACEMENT AND SECURITY OF
FASTENERS ASSOCIATED WITH
FIXING MONITOR POSITION ON THE
BASE. YOU MUST SECURE MONITOR
IN POSITION DESIRED. THIS WILL
INSURE THAT MONITOR STAYS IN
POSITION DESIRED ONCE
INSTALLATION IS COMPLETE.
WARNING: CENTER BOTTOM BOLT IS
NOT ADJUSTABLE AFTER
MOUNTING/STICKING BASE TO
DASH WITH ADHESIVE STRIP!
1. REMOVE EXISTING REARVIEW
MIRROR FROM VEHICLE. FIGURE 2.
2. MOUNT REARSIGHT MONITOR ON
WINDSHIELD LUG AND TIGHTEN
SCREW. FIGURE 3. ROUTE
CAMERA EXTENSION HARNESS TO
THE BACK OF VEHICLE.
3. SECURE HARNESSES WITH WIRE
TIES.