Keypad Operation Instructions
AY-G/H6xx0 Series Installation and User Manual
23
6.8
Return to Factory Default Settings
You must be very careful before using this command! This
erases the entire memory and returns all codes to their
factory default setting.
To return to factory default settings:
1.
Enter Programming mode.
2.
Press
0
to enter Menu 0.
The white LED blinks.
3.
Enter your Programming code.
If the Programming code is valid, all memory is erased, you
hear three beeps and the controller returns to Standby mode.
If the Programming code is invalid, you hear a long beep and
the controller returns to Standby mode without erasing the
memory of the controller.
6.9
Replacing a lost Programming Code
In the event that the Programming code is forgotten, the unit
may
be reprogrammed in the field using the following instructions:
1.
Remove power from the reader.
2.
Activate tamper by removing the reader from the wall or
removing the reader's case.
3.
Apply power to the reader.
4.
You now have 10 seconds to enter Programming mode using
the factory default Programming code
1234
.