Rosslare O2S AY-G6 0 Series, Инструкция по установке и эксплуатации, Страница: 14 / 34

Keypad Operation Instructions
14 AY-G/H6xx0 Series Installation and User Manual
6. Keypad Operation Instructions
This chapter is relevant to models AY-G63x0 and AY-H63x0.
6.1 Programming Menu
Some but not all of the reader options can be programmed using
the unit's keypad driven Programming Menu System. During the
unit’s manufacturing process, certain codes and settings are pre-
programmed. These settings are called the default factory settings.
Table 2 shows the names of all the menus.
Default factory settings are marked by *.
Table 2: Reader Programming Menu
Menu Description Default
1 Selecting Keypad Transmission Format
1 – Single Key, Wiegand 6-Bit (Rosslare Format)
2 – Single Key, Wiegand 6-Bit with Parity Bits
3 – Single Key, Wiegand 8-Bit, Nibbles Complemented
4 – 4 Keys Facility code, Wiegand 26-Bit
5 – 1 to 5 Keys + Facility code, Wiegand 26-Bit
6 – 6 Keys Binary-Coded Decimal (BCD) and Parity Bits,
Wiegand 26-Bit
8 – 1 to 8 Keys BCD, Clock & Data
9 – Single key, Wiegand 4-Bit
*
3 Changing the Programming code 1234
4 Changing the Facility code 0
6 Setting the Backlight
Always off
Always on
10 sec. backlight after key press, otherwise off
10 sec. backlight after key press, otherwise dimmed
*
0 Return to Factory Default Settings