Rosslare O2S AY-G6 0 Series, Инструкция по установке и эксплуатации, Страница: 16 / 34

Keypad Operation Instructions
16 AY-G/H6xx0 Series Installation and User Manual
6.4 Selecting Keypad Transmission Format
There are eight keypad transmission formats.
More information on each of the keypad transmission formats is
presented in Section 7.4.1.
Only one keypad transmission format can be active at any one time.
To select the keypad transmission format:
1. Enter Programming mode.
2. Press 1 to enter Menu 1. The green LED blinks.
3. Enter one of the following options:

1 – Single Key, Wiegand 6-Bit (Rosslare Format) (default)

2 – Single Key, Wiegand 6-Bit with Parity Bits

3 – Single Key, Wiegand 8-Bit, Nibbles Complemented

4 – 4 Keys Facility Code, Wiegand 26-Bit

5 – 1 to 5 Keys + Facility Code, Wiegand 26-Bit

6 – 6 Keys BCD and Parity Bits, Wiegand 26-Bit

8 – 1 to 8 Keys BCD, Clock & Data Single Key

9 – Single Key, Wiegand 4-Bit
When selecting Option 8, the right LED turns orange and an
additional input is required to specify the number of keys in
the PIN code.
The LED momentarily turns to green as you hear three beeps.
The system returns to Standby mode.
If an incorrect option number is entered, there is one long beep
and the unit returns to Standby mode. The keypad transmission
format remains unchanged.
Reader settings are affected by keypad programming settings.
Settings are preset by the last keypad operation.