Wiring Instructions
10
AY-G/H6xx0 Series Installation and User Manual
3.
Wiring Instructions
The units are supplied with a 10-conductor 18” (46 cm) pigtail or
with 10 terminal blocks.
To connect a pigtail reader to the controller:
1.
Prepare the reader cable by cutting its jacket back 3.2 cm (1¼”)
and strip the insulation from the wires 1.3 cm (½").
2.
Prepare the controller cable by cutting its jacket back 3.2 cm
(1¼") and strip the insulation from the wires 1.3 cm (½").
3.
Splice the reader’s pigtail wires to the corresponding controller
wires (as indicated in Table 1) and cover each joint with
insulating tape.
Table 1: Wiring
Terminals Wire Color
Output
1
Red
VIN 6 ~ 16 VDC
2
Black
Shield/Ground
3
Green
Data 0 / Data
4
White
Data 1 / Clock
5
Purple
Tamper Output
6
Orange
Green LED CTL
7
Brown
Red LED CTL
8
Yellow
Buzzer CTL
9
Blue
OSDP* / RS-485-A
10
Gray
OSDP* / RS-485-B
*OSDP (selected models)
4.
Trim and cover all unused conductors.