Rosslare AYC-F54 Скачать руководство пользователя страница 12

Страница: 12 / 60

Wiring Instructions

AYC-Fx4 and AYC-Gx4 family manual

Page 11

Wiring Instructions

The unit is supplied with a 22-inch pigtail, having a 6-conductor

cable. To connect the unit to the controller, perform the following:
Prepare the unit's cable by cutting the cable jacket back 1¼

inches and strip the wire ½ inch. Prepare the controller cable by

cutting the cable jacket back 1¼ inches and strip the wire ½ inch.

Splice the unit’s pigtail wires to the corresponding controller wires

and cover each connection.
Refer to the wire color table below, and to the wiring diagrams

provided on the following pages.

Reader

Controller

Color Functionality

5~16 VDC

Red

+DC Input

Shield / Ground Shield / Ground Black

Ground

Data 1 / Clock

C 1

White Communication

Data 0 / Data

C 2

Green Communication

LEDCTL

AUX. IN

Brown LED Control / Auxiliary Input

Tamper

Purple Tamper

If the tamper output is used, connect the purple wire to the

correct input on the controller when used as a reader, or to a

zone input of an intruder alarm system when used as a controller.
Trim and cover all unused conductors.

Note:

•

The individual wires from the unit are color-coded

according the Wiegand standard.

•

When using a separate Power Supply for the Reader, this

Power Supply and that of the Controller must have a

common ground.

•

The Reader’s cable shield wire should preferably be

attached to an earth ground, or a signal ground

connection at the panel, or power supply end of the cable.

This configuration is best for shielding the Reader cable from

external interference

Содержание AYC-F54





























































Результаты поиска

Содержание AYC-F54

Отзывы:

Похожие инструкции для AYC-F54

Бренды по названию

Популярные бренды

Rosslare AYC-F54, Инструкция по эксплуатации

Результаты поиска

Содержание AYC-F54

Отзывы:

Похожие инструкции для AYC-F54

Бренды по названию

Популярные бренды