Rosslare AYC-F54 Скачать руководство пользователя страница 49

Страница: 49 / 60

Controller Functionality

AYC-Fx4 and AYC-Gx4 family manual

Page 48

•

If the selected slot already has a Primary and Secondary

Code, you will hear a

long beep and the

controller will return to Normal Mode.

4) Enter the PIN Code you wish to assign

as the Primary or Secondary Code for

this slot number.

If the code entered is valid the Mode LED will stop flashing and

then the controller is ready for you to enter the next 3-digit slot

number (refer to step 2) that you want to assign a code to, or

press the “#” key to move to the next slot number. If you do not

wish to continue enrolling codes, press the “#” key twice and the

controller will return to Normal mode.

Enrolling Secondary Codes using the Code Search Method

The Code Search feature enables you to quickly enroll a

Secondary Code to a user who already has a Primary Code.
1) Enter the Programming

Mode.

2) Press 7 to enter Menu 7.

•

The Door LED will turn

orange

3) Enter 000 as the 3-digit User Slot

number.

•

The Door LED will flash

orange.

The controller is now waiting for the Primary Code of the User to

whom you want to add a Secondary Code.
4) Enter the Primary Code belonging to the user for whom you

wish to add a Secondary Code.

•

The Mode LED will flash

red.

? ? ? ?

0 0 0

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Orange

Mode/Transmit

Door/Program

Orange

Mode/Transmit

Door/Program

Red

Orange

Содержание AYC-F54





























































Результаты поиска

Содержание AYC-F54

Отзывы:

Похожие инструкции для AYC-F54

Бренды по названию

Популярные бренды

Rosslare AYC-F54, Инструкция по эксплуатации

Результаты поиска

Содержание AYC-F54

Отзывы:

Похожие инструкции для AYC-F54

Бренды по названию

Популярные бренды