Rosslare AYC-F54 Скачать руководство пользователя страница 17

Страница: 17 / 60

Reader Functionality

AYC-Fx4 and AYC-Gx4 family manual

Page 16

Mode/Transmit

Door/Program

Red

green and the AYC-Fx4 / AYC-Gx4 will be in Programming

Mode.

Note:

•

The factory 4-digit Programming Code is 1234.

•

If a Programming Code is not entered within 30 seconds,

the AYC-Fx4/AYC-Gx4 will return to Transmit Mode.

Exiting Programming Mode

1) To exit the Programming Mode at any time press #:

•

You will hear a beep

•

The Program LED will be off

•

The Transmit LED will turn red

2) This indicates that the AYC-Fx4/AYC-Gx4 has returned to

Transmit Mode

3) Wrong entries may reset the reader back to Transmit Mode.

While in Programming Mode if no key is pressed for 30 seconds

the AYC-Fx4/AYC-Gx4 will exit Programming Mode and return

to Transmit Mode.

5.2.1.

Selecting Keypad Transmission Format

The AYC-Fx4/AYC-Gx4 has eight different keypad transmission

formats to select from. Follow the steps below to select the

appropriate keypad transmission format that you wish to use.
1) Enter Programming Mode.

2) Press “1” to enter.

•

The Transmit LED will turn

Red.

3) Enter the appropriate option no. for the

keypad transmission format that you wish

to select (see table below).

If an incorrect option no. is entered the reader will return to

Mode/Transmit

Door/Program

Green

Mode/Transmit

Door/Program

Red

Green

Содержание AYC-F54





























































Результаты поиска

Содержание AYC-F54

Отзывы:

Похожие инструкции для AYC-F54

Бренды по названию

Популярные бренды

Rosslare AYC-F54, Инструкция по эксплуатации

Результаты поиска

Содержание AYC-F54

Отзывы:

Похожие инструкции для AYC-F54

Бренды по названию

Популярные бренды