Ross YOYAGER X1, Руководство по обслуживанию, Страница: 4 / 62

Important Regulatory and Safety Notices to Service Personnel
Before using this product and any associated equipment, refer to the "Important Safety Instructions" listed below so
as to avoid personal injury and to prevent product damage.
Products may require specific equipment, and /or installation procedures be carried out to satisfy certain regulatory
compliance requirements. Notices have been included in this publication to call attention to these specific
requirements.
Symbol Meanings
Protective Earth
— This symbol identifies a Protective Earth (PE) terminal, which is
provided for connection of the supply system’s protective earth (green or green/yellow)
conductor.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the product. Failure to heed this information may present a risk of damage or injury to persons
or equipment.
Warning
— The symbol with the word " Warning " within the equipment manual indicates a
potentially hazardous situation, which if not avoided, could result in death or serious injury
Caution
— The symbol with the word " Caution " within the equipment manual indicates a
potentially hazardous situation, which if not avoided, may result in minor or moderate injury. It
may also be used to alert against unsafe practices.
Notice
— The symbol with the word " Notice " within the equipment manual indicates a
situation, which if not avoided, may result in major or minor equipment damage or a situation,
which could place the equipment in a non-compliant operating state.
Warning Hazardous Voltage
— The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of
shock to persons.
ESD Susceptibility
— This symbol is used to alert the user that an electrical or electronic
device or assembly is susceptible to damage from an ESD event.