Ross YOYAGER X1, Руководство по обслуживанию, Страница: 16 / 62

3–2 • Hardware Overview and Installation Voyager Maintenance Guide (v02)
Power LED Area
The Power LED area is located on the front of the Voyager system, in the middle top of the chassis. This area
contains the Power button for the Voyager system, as well as activity LEDs for system components. Refer to the
section “Front View of the System ” on page 3–1 to locate the Power LED area on the front of the Voyager system.
The following diagram Figure 3.2 displays the Power LED area of the Voyager system. Descriptions of individual
components are contained in the legend below the diagram.
Figure 3.2 Power LED Area
1) Power Button — Press this button to begin the boot
procedure. Press and hold the button for five seconds to
power down the system after a hardware or software
failure.
2) Reset Button — Press this button to reset the system
after a hardware or software failure. Pressing this button
also reboots the system.
3) Power Active Indicator LED — This LED is active
when the system is powered on.
4) Hard Disk Activity LED — This LED activates when
there is read/write activity on any system hard disk..
5) Network 1 Activity LED — This LED is not active.
6) Network 2 Activity LED — This LED is not active.