Ross SRG-4400, Руководство пользователя

Страница: 42 / 193

3–12 • Functional Check Procedures SRG-4400 User Manual (Iss. 06)
6.
Select < -System Report >. This menu screen reports the various system version
numbers.
7.
Return to the System Setup menu using the [ Back ] button.
8.
Select < -GPS Report >. This menu screen reports the status of the GPS receiver
sub-system.
9.
Return to the System Setup menu using the [ Back ] button.
10.
Select < Configuration >.
11.
Select < Changeover > to define whether the SRG-4400 is the Primary or the Backup
unit in a changeover pair.
12.
Select < LCD Brightness > to select the brightness of the LCD screen.
13.
Select < AES1-8 + Analog > to select the reference source for the AES and Analogue
audios.
14.
Select < AES7 Output is > to select AES channel 7 or LTC channel 3 to appear on the
relevant pin(s) of the multi-way connector on the multifunction sub-module.
15.
Select < AES8 Output is > to select AES channel 8 or LTC channel 4 to appear on the
relevant pin(s) of the multi-way connector on the multifunction sub-module.
16.
Select < Pulse 1 > to select a pulse type to appear at the relevant rear panel BNC of the
multifunction sub-module.
17.
Repeat with < Pulse 2 > and < Pulse 3 >to select pulse types at the relevant rear panel
BNCs of the multifunction sub-module.
18.
Select < 10MHz Mode > to select the source of a 10MHz reference.
19.
Return to the Top Level menu using the [ Back ] button.
Network Settings
The Network menu can be reached via the < -System Setup> menu option.
Many of the parameters that can be configured in this menu require the operator to obtain details
from a Network Administrator. Once configured, they are unlikely to change.
Changes to this menu are likely to occur very rarely, and so no formal description will be outlined
here. For the purposes of this functional check, simply scroll through the menu (and sub-menus)
to check for any corrupted entry. Refer to the relevant pages in the section “
System Setup
Menus ” on page 5-39 for details of the various options.
Option Enable Settings
The Option Enable menu can be reached via the < -System Setup > menu option.
This menu screen lists the installed Option Keys for enabled options within the SRG-4400.
Changes to this menu are extremely unlikely to occur, and so no formal description will be
outlined here. For the purposes of this functional check, simply scroll through the menu to check
for any corrupted entry. Refer to the section “
System Setup Menus ” on page 5-39 for details of
the various options.