6
BEWARE OF KICKBACK! Cont …..
•
Make sure that the area in which you are cutting is free from obstructions. Do not let the
nose of the guide bar contact a log, branch, or any other obstruction which could be hit
while you are operating the saw.
•
Cut at high engine speeds.
•
Do not overreach or cut above shoulder height.
•
Follow manufacturer’s sharpening and maintenance instructions for the saw chain.
•
Only use replacement bars and chains specified by the manufacturer or the equivalent.
PARTS IDENTIFICATION
Fig 3
1
2
3
4
5
5
6
7
8-9
10
11
14
13
12
15
17
19
20
18
21
16
1. Chain bar
2. Saw chain
3. Chain tensioning screw
4. Bucking spikes
5. Chain brake lever / front hand
guard
6. Front handle
7. Starter handle
8. Spark plug (under the air filter
cover)
9. Air filter cover
10. Ignition switch
11. Safety lock
12. Oil tank cap
13. Fan housing
14. Fuel tank cap
15. Rear handle / bootstrap
16. Chain guard
17. Choke / (carburettor setting)
18. Bar fastening nuts
19. Throttle lever
20. Primer bulb
21. Chain brake / clutch cover
