11
Starting Cont …….
Set the Ignition switch (Fig 12 –A) to the “I” ON position
Fig 12
Place the saw on a firm and level surface. Hold the saw
securely with your foot as illustrated. Pull the starter 3
to 5 times. Stop when the engine tries to fire.
Push the choke knob back in (Fig 11-A) and then pull
the starter again several times until the motor starts.
When the motor starts let it idle of a couple of seconds
to warm up. Apply part throttle and maintain the unit
at a low to Medium speed for a further 10 second.
Disengage the chain brake by pulling back the chain
bake lever and bringing the motor to cutting
speed
