Ross openGear SEA-8803, Руководство пользователя

Страница: 32 / 44

4–2 • DashBoard Menus SEA-8803 User Manual (Iss. 02)
Status Tabs
This section summarizes the read-only information displayed in the Status tabs. The fields in the
Signal tab vary in severity from green (valid), yellow (caution), to red (alarm). DashBoard
reports the most severe alarm for a single field. Alarm colors are noted within the tables as text
set in brackets next to the menu parameter name.
Signal Tab
Table 4.1 outlines the read-only information displayed in the Signal tab.
Table 4.1 Signal Tab Items
Tab Title Item Parameters Description
Channel A
Channel A Status
OK (Green) A valid input signal is detected
No input (Red)
Input signal is not present. The Alarm on
Loss of Input for this channel is enabled.
No input (Green)
Input signal is not present. The Alarm on
Loss of Input for this channel is disabled.
Input
No signal Input signal is not present
<125mB/s signal
A signal detected at less than 125Mbps is
present
SD signal A valid 270Mbps input signal is present
HD signal A valid 1.485Gbps input signal is present
3G signal A valid 2.97Gbps input signal is present
Equalizer bypassed
Input signal is present and the equalizer is
bypassed (the Enable Equalizer check
box is not selected in the Setup tab)
Output
Signal present Input signal is present and valid
No signal (muted) Input signal is not present
Input Cable Length
(m)
x (1694A) / y (1855A)
Indicates the approximate cable length
used for the input signal where:
• x represents the Belden 1694A length
• y represents the Belden 1855A length
N/A
One of the following is occurring:
• a valid input source was not detected on
the input BNC
• the Enable Equalizer check box is not
selected in the Setup tab